No products in the cart.
Menampilkan 1–16 dari 28 hasilDiurutkan menurut yang terbaru
- Function Mode: Counter (Up/Down, Bi-direction, Up, A/B Phase) Frequency
- Input Frequency: Frequency Mode: 5Hz ~1MHz Counter Mode: 1MHz max.
- Minimum Pulse Width: 1μ sec. (Frequency/Counter Mode)
- Isolated Voltage: 2500 Vdc
- Programmable Digital Noise Filter: 1~65000μ sec.
- 4 channels for Counter, 8 channels for Frequency
- Counter Aux. Function: Initial preset, hi-low alarm setting, alarm digital output mapping, overflag
- Supports Modbus/RTU protocol
- High Power Relay Output : 250Vac@5A, 30Vdc@5A
- 8-channel Relay Output
- 8 form A channels
- Jumper setting for output status when reset
- 8 LED indicators
- Contact rating: AC: 125 V @ 0.6 A; 250 V @ 0.3 A
- Breakdown voltage: 500 VAC (50/60 Hz)
- Relay on time (typical): 3 msec.
- Relay off time (typical): 1 msec.
- Total switching time: 10 msec.
- Insulation resistance: 1000 MW minimum at 500 VDC
- Channels:2 x form A , 4 x form C
- 16-channel
- Optical Isolation: 2500 Vdc
- Over Voltage Protection: 70 Vdc
- Power Consumption: 0.6 W (max.)
- 16-channel
- Optical Isolation: 2500 Vdc
- Over Voltage Protection: 70 Vdc
- Power Consumption: 0.6 W (typical)
- Power Dissipation: 300 mW
- Channels: 16
- Operating voltage: 30 Vmax
- Digital output: Open collector to 30 V, 100 mA max. load
- Power consumption: 0.5 W (typical); 0.84 W (max.)
- LED indicator: On: Output logic level "1"
- Output status hold function
- Power dissipation:300 mW for each channel
- Channels: 16
- Operating voltage: 30 Vmax
- Digital output: Open collector to 30 V, 100 mA max. load
- Power consumption: 0.25 W (typical); 0.53 W (max.)
- Power dissipation: 300 mW for each channel
- 16-channel
- I/O Type: 8 DO & 8 DI
- Optical Isolation: 2500 Vdc
- Power Consumption: 0.68 W (Typical)
- Digital Input Channels:32
- Digital Input Channel I/O Type:DI, 24VDC (Sink/Source)
- 2500VDC Isolation voltage protection
- Protection only for ADAM-5550 series
- Channels: 8
- Digital input level: Logic level 0: +1 V max.
- Isolation voltage: 5000 VRMS
- Power consumption: 0.27 W (max)
- 16-channel
- 50 Vmax Input Voltage
- 2500 Vdc Optical Isolation
- 70 Vdc Over Voltage Protection
- 16 input channels
- Input voltage: 30 Vmax
- Circuit type: Pull-Up current: 0.5 mA (Source Type)
- Power consumption: 0.84 W(max.)
- Channels: 16
- Input voltage: 30 Vmax
- Circuit type: Pull-Up current: 0.5 mA (Source Type)
- Power consumption: 0.53 W
- Channels: 16
- I/O Type: bit-wise selectable by DIP switch
- Digital input: Support Dry/Wet Contact
- Digital output: Open Collector to 30 V, 450 mW max. load
- Power consumption: 0.35 W (typical); 1.2 W (max)
- Supports open collector (Sink) output type
- Rated voltage : 8 ~ 30 VDC
- Rated current : 200 mA (max load)
- Over voltage protection : +40 VDC
- Pulse output frequency : 1 KHz
- Opto-isolator response time : 150 us (max)
- Isolation voltage : 2000 VDC
- -40 ~ 70°C operating temperature